2400 Series Supply Units

data-wpview-pad=”1″>

  • Self-diagnostic digital temperature readouts with quick scan and fault sensing features
  • Solid Sate temperature controllers with one touch individual standby features
  • Melt tanks offered in 12, 25 and 37 lb. capacities
  • Teflon® coated melt tanks reduce charred glue build-up
  • Precision gear pumps combined with a variety of motor options allows a wide selection of pump rates
  • Easy access to all electrical operating controls for quick maintenance
  • Low temperature pump lockout prevents premature system start-up
  • Over temperature protection with visible alarm
  • Full opening lid allows for easy adhesive loading and cleaning of the supply unit
Rear of Machine

Rear of Machine

  • Capable of running from one to four hoses and applicators
  • Flow/pressure regulation of adhesive output
  • Quick release electrical connectors
  • Easy access drain port for cleaning and routine maintenance
  • Hose mounting supports protects electrical and hydraulic fittings

STS12 Technical Specifications

STS12 Lb Hot Melt Glue Tank

STS12

  • 12 pound adhesive capacity
  • 16 pounds per hour melt rate
  • 100 pounds per hour pump rate (with 1/5 H.P. motor)
  • Offered in 120VAC 20/30Amp or 230VAC 20Amp
  • 35 minute average warm-up time
  • Weight of machine 66 pounds empty
  • 32”L x 14”W x 13.50”H

STS25 Technical Specifications

STS25 Lb Hot Melt Glue Tank

STS25

  • 25 pound adhesive capacity
  • 20 pounds per hour melt rate
  • 100 pounds per hour pump rate (with 1/5 H.P. motor)
  • Offered in 120VAC 20/30Amp or 230VAC 20Amp
  • 35 minute average warm-up time
  • Weight of machine 70 pounds empty
  • 32”L x 14”W x 19.50”H

STS37 Technical Specifications

STS37 Lb Hot Melt Glue Tank

STS37

  • 37 pound adhesive capacity
  • 25 pounds per hour melt rate
  • 100 pounds per hour pump rate (with 1/5 H.P. motor)
  • Offered in 120VAC 20/30Amp or 230VAC 20Amp
  • 35 minute average warm-up time
  • Weight of machine 75 pounds empty
  • 32”L x 14”W x 25.50”H

 

* Note all specifications are measures with typical EVA based adhesives. Specifications will vary depending on adhesive type and supply unit options/upgrades. Consult factory for additional pump rate and melt rate packages. Specifications subject to change.